描述
Presenting New Happymodel Fyujon V2 Board
Features -:
• All holes are now M3 which can be converted to M2 using rubber grommets
• Supports 20mm/25.5mm/30mm mounting
• 4 Mounting support structures for added durability
• Better shape to avoid sharp edges
• Ability to switch between SMD or IPEX antenna (Default antenna is SMD ceramic)
• IPEX 1 rotated by 90° for added durability
• Improved circuitry
2.4GHz Receiver Specifications
Type: ISM
ESP8285 MCU
SX1280/1281IMLTRT RF Module
SMD Ceramic antenna
Frequency Range: 2400 MHz to 2500 MHz
Maximum receive refresh rate: 500Hz
Minimum receiver refresh rate: 25Hz
Working Voltage: 5v
Antenna: Onboard SMD ceramic antenna or IPEX1 connector for external 2.4Ghz antenna
SMD Ceramic Antenna Peak gain: 3.7Db
ELRS Firmware target: HappyModel EP 2400 RX
5.8GHz VTX Specifications
Frequency: 5.8G 48CH
Transmitting Power: 0/RCE/25mw/100mw/300mw
Power supply: DC 5V
Current (5v): <650ma (300mw)
SmartAudio ready
VTX Table
# SMARTAUDIO
# vtxtable
vtxtable bands 6
vtxtable channels 8
vtxtable band 1 BOSCAM_A A FACTORY 5865 5845 5825 5805 5785 5765 5745 5725
vtxtable band 2 BOSCAM_B B FACTORY 5733 5752 5771 5790 5809 5828 5847 5866
vtxtable band 3 BOSCAM_E E FACTORY 5705 5685 5665 0 5885 5905 0 0
vtxtable band 4 FATSHARK F FACTORY 5740 5760 5780 5800 5820 5840 5860 5880
vtxtable band 5 RACEBAND R FACTORY 5658 5695 5732 5769 5806 5843 5880 5917
vtxtable band 6 LOWRACE L FACTORY 5333 5373 5413 5453 5493 5533 5573 5613
vtxtable powerlevels 5
vtxtable powervalues 1 2 14 20 26
vtxtable powerlabels 0 RCE 25 100 400
save
